- Make sure the surface is cool.
- Spray a small amount of product onto the surface to be decontaminated.
- Wait 2 to 3 minutes and observe the formation of a purple or darker color.
- Using a wheel well brush, detailing brush, or microfiber glove, scrub evenly to help completely remove contaminants.
- Rinse thoroughly afterwards using a high-pressure washer.
Technical Specifications
USAGE NOTES
If no color change is observed, it indicates that there is no ferrous contamination. In case of severe contamination, a second application may be necessary. On common iron surfaces, the product will remove rust, but protection is needed in the applied area. The product has a strong odor, but it does not cause harm to the user’s health.
HOW TO USE
Ensure the surface is cool. Spray a small amount of the product onto the surface to be decontaminated. Wait 2 to 3 minutes and observe the appearance of a purple or darker color. Using a wheel well brush, detailing brush, or microfiber glove, scrub evenly to help completely remove contaminants. Rinse afterwards with a high-pressure washer.
COMPOSITION
Anionic surfactant, alkalizing agent, acidifying agent, preservative and vehicle.
DILUTION
Ready to use in both versions.
ADDITIONAL INFORMATION
Izer can also be used for paint decontamination, diluted up to 1:1. When decontaminating paint with Izer, decontamination with V-Bar and V-Lub is still necessary. Izer also removes rust. Do not apply Izer to heated surfaces or in direct sunlight.
