PRIZM
Advanced Glass Decontamination for Crystal-Clear Visibility
£ 13,99 – £ 26,99Price range: £ 13,99 through £ 26,99
Prizm Vonixx is a specialist glass decontamination cleaner developed to remove stubborn water marks, mineral deposits and embedded contaminants that ordinary glass cleaners cannot eliminate. Its advanced formula restores clarity, transparency and visibility, making it ideal for automotive glass care where precision and performance are required.
Although designed primarily for glass surfaces, Prizm is also versatile enough to be used on emblems, paint decontamination, engine components and chassis, provided a spot test is carried out beforehand. Its controlled action delivers effective cleaning without compromising the surface when used correctly.
Additional Information
Always carry out a spot test before use on any surface.
Do not allow the product to dry on the applied surface.
Rinse thoroughly immediately after application.
Important Safety Information
Do not use on automotive mirrors.
Do not apply to the interior side of automotive glass.
Always wear nitrile or latex gloves and safety goggles throughout the entire application process.
Pizm by Vonixx is an acid-based glass treatment designed to restore maximum clarity to automotive glass.
When applied to the windscreen, it naturally enhances transparency, revealing the true condition of the surface. As a result, pre-existing wiper marks and light scratches may become more visible after application.
Do not use this product on glass with deep scratches, cracks, or stone-chip damage. In such cases, the product may cause staining or surface blemishes.
Ready to Use
Removes water spots and mineral deposits
Restores clarity and transparency to glass
Versatile application across multiple automotive surfaces
Professional-grade performance when used as directed
Always perform a test on a small, inconspicuous area to evaluate the result.
Apply a small amount of product to a microfibre towel.
Rub the glass using firm, back-and-forth horizontal movements, applying moderate pressure, over an area no larger than 60 × 60 cm, for at least 40 seconds.
Do not allow the product to dry on the surface. If it begins to dry, lightly re-dampen the microfibre towel and reapply.
Rinse thoroughly with plenty of clean water immediately after use.
Prizm – Glass Decontamination & Restoration Cleaner
Prizm Vonixx is a powerful glass decontamination cleaner designed to remove stubborn water marks and mineral deposits that ordinary cleaners cannot eliminate. It restores clarity, transparency and visibility, delivering a cleaner, brighter and safer driving experience.
Developed for external automotive glass, Prizm offers professional-grade performance when used correctly, making it the ideal solution for enthusiasts and detailers who demand visible results and precision care.
HOW TO USE
| 5 |
|
0 |
| 4 |
|
0 |
| 3 |
|
0 |
| 2 |
|
0 |
| 1 |
|
0 |
Only logged in customers who have purchased this product may leave a review.
Related Products
Vonixx Hidracouro is a premium leather conditioner and protector specially formulated to hydrate, nourish and preserve automotive leather surfaces. Its lanolin-based formula penetrates deep into the leather fibres, preventing dryness, cracking and premature ageing while restoring suppleness and a like-new appearance.
Ideal for seats, armrests and other leather trims in cars, motorcycles, aircraft and boats, Hidracouro leaves leather soft, flexible and beautifully revitalised without greasy or sticky residue.
Ready to Use
Deeply hydrates and nourishes leather to prevent drying and cracking
Restores softness and flexibility, giving leather a refreshed, like-new feel
Helps maintain the appearance and longevity of leather surfaces
Quick and easy application with visible results
Leaves a natural, non-greasy finish
Ensure the leather surface is clean and dry before application.
Apply a small amount of Hidracouro to a foam or microfibre applicator.
Work the product evenly into the leather using gentle circular motions.
If needed, repeat to ensure full hydration and coverage.
For a matte finish, buff gently with a clean, dry microfibre cloth after application.
47 in stock
V-Light Pro is a SiO₂-based ceramic coating developed to restore, protect and preserve headlights, tail lights and automotive glass. It forms a transparent, durable protective layer that prevents yellowing, oxidation and UV damage, keeping surfaces clear and protected for up to 12 months.
Designed for both new and oxidised headlights, V-Light Pro delivers long-lasting clarity and protection, enhancing visibility and maintaining a like-new appearance. Its advanced ceramic formulation also improves resistance to weathering and environmental exposure
Recommended Use
Headlights (polycarbonate)
Tail lights
Automotive glass / windscreens
Curing Time
Partial cure: 6 hours
Full cure: 72 hours
Note: During the curing period, keep the vehicle protected from rain, moisture and harsh weather conditions.
Ready to Use
Coverage: 50 ml treats up to 50 pairs of headlights
Prevents yellowing and oxidation
SiO₂ ceramic technology for long-term protection
Can also be used for windscreen protection
For Oxidised Headlights
Sand the headlights to remove oxidation.
Decontaminate using a clay bar and V-Lub, then clean with Rezet.
Apply a generous amount of product using horizontal movements with the applicator and suede microfibre cloth, ensuring even coverage.
Ensure the entire surface is fully covered, observing uniformity and transparency.
For New Headlights
Decontaminate using a clay bar and V-Lub, then clean with Rezet.
Apply a generous amount of product using horizontal movements with the applicator and suede microfibre cloth.
Ensure full surface coverage.
Finish with a clean, dry microfibre towel.
Note: New headlights do not require sanding or polishing prior to application.
36 in stock
Acidus Fast is a high-performance acidic automotive cleaner developed to remove mineral deposits and encrusted contamination that conventional cleaners cannot eliminate. Its fast-acting formula restores surfaces to a clean, renewed appearance, helping recover original finish and shine.
Ideal for wheels, chassis, emblems, exterior plastics and metal surfaces, Acidus Fast also assists in removing light water spots from glass and paintwork. Its versatility makes it effective for engine bays and hard-to-reach areas, delivering professional-grade results when used correctly.
Ready to use, delivering consistent and reliable results
Fast-acting acid formula for rapid removal of mineral deposits and heavy contamination
Powerful descaling action that eliminates stubborn, embedded residues
Highly effective on wheels, chassis, emblems, exterior plastics and metal surfaces
Restores original appearance by removing contamination conventional cleaners can’t
Ideal for professional detailing and heavy-duty cleaning tasks
Spray the product directly onto the dry, cool surface.
Agitate using a soft detailing brush or suitable cleaning brush.
Rinse thoroughly with plenty of water until the product is completely removed.
103 in stock
Glazy is a high-tech 4-in-1 glass cleaner and care solution developed to provide complete care for glass surfaces in and out of your vehicle. It not only cleans and removes grease, dust and water marks, but also conditions and protects the glass while helping reduce the risk of fine surface scratches — all in one easy-to-use formula.
Special polymers in the Glazy formula minimise friction on the glass surface, decreasing the chances of scratches from windshield wipers and lateral movement. After application, glass feels smoother and looks like new, improving both clarity and visibility.
This versatile product isn’t just for automotive glass — it can also be used safely on mirrors, computer screens, televisions and multimedia displays, making it a smart choice for comprehensive glass care.
Ready to Use
4-in-1 glass treatment – cleans, protects, conditions and reduces fine scratches
Specialised polymers reduce friction on glass surfaces
Helps minimise scratches caused by wiper movement and window operation
Leaves a smooth, slick touch with a like-new glass appearance
Enhances clarity and transparency for improved visibility
Safe for automotive glass, mirrors and screens
Easy, quick application with immediate results
Ideal for maintenance and protection of glass surfaces
Spray a small amount of Glazy directly onto the glass surface.
Spread quickly with a glass-specific microfibre cloth.
Flip the cloth or use a second clean, dry towel to buff to a streak-free finish.
Repeat if necessary for tougher residues.
72 in stock



Reviews
There are no reviews yet.