SHINY – 500ml
High-gloss tyre dressing for a deep, long-lasting wet look
£ 15,99
Vonixx Shiny is an advanced tyre dressing developed exclusively to renew, protect and deliver an intense, long-lasting shine to automotive tyres. Its specialised formula conditions the rubber while creating a wet-look gloss finish that elevates the overall appearance of your vehicle and highlights attention to detail.
Unlike many tyre shine products, Shiny is water-resistant and durable, maintaining its striking gloss even in wet conditions and for extended periods — with results that can last up to 60 days on properly prepared tyres.
Intense high-gloss finish for a wet, showroom-quality look
Long-lasting protection, resisting rain and mud
Water-resistant formula that doesn’t wash away easily
Conditions and protects tyre rubber against drying and ageing
Clean the tyre surface thoroughly and allow it to dry.
Apply the product using a foam applicator, spreading evenly until the tyre is fully revitalised.
If necessary, apply an additional layer to enhance gloss and finish.
71 in stock
Wet-Look Tyre Shine That Lasts
Vonixx Shiny is a high-performance tyre dressing that delivers an intense, wet-look gloss with long-lasting protection. Its water-resistant formula conditions the rubber, resists rain and mud, and keeps tyres looking deeply glossy and well cared for for up to 60 days.
Easy to apply and visually striking, Shiny is the perfect choice for achieving a showroom-quality finish with durability and impact.
HOW TO USE
| 5 |
|
0 |
| 4 |
|
0 |
| 3 |
|
0 |
| 2 |
|
0 |
| 1 |
|
0 |
Only logged in customers who have purchased this product may leave a review.
Related Products
REXER is a high-durability pigmented tyre restorer that forms a dry, glossy and water-resistant film in a single application. Designed to renew and enhance the appearance of tyres, it delivers a long-lasting, uniform finish with excellent resistance to moisture.
Important Note
Pigmented product. Wear protective gloves to avoid staining hands.
If the product comes into contact with any surface other than the tyre, wash immediately.
Ready to Use
Single-application performance
Dry and glossy finish
Water-resistant protective film
Shake well before use.
Clean and dry the tyres thoroughly using Delet Vonixx.
Using a soft-bristle brush, apply the product evenly over the entire tyre, ensuring full coverage without streaks or runs.
Allow the product to dry for 30 minutes.
70 in stock
Bring faded, dull and weathered plastic trims back to life with Restaurax by Vonixx — a premium plastic restoration and protection solution engineered to renew and protect automotive plastics with ease. Whether on bumpers, door panels, trims or dashboards, Restaurax revives ageing surfaces, restores original colour and delivers a long-lasting glossy finish that looks like new.
Its advanced polymer-based formula not only revitalises appearance but also shields plastics against the effects of time and harsh environmental exposure, helping to prevent premature fading and degradation. This makes it ideal for both internal and external plastic surfaces, so you can refresh interior trims and exterior mouldings with the same high-performance result.
Restaurax offers water resistance and UV protection, with durability of up to six months on interior plastics and around two months on exterior plastics when applied as directed.
Ready to Use
Deeply renews faded plastic surfaces
Restores original colour and gloss
Protects against UV damage and environmental ageing
Suitable for interior and exterior plastics
Easy ready-to-use application
For best results, start with a clean, dry surface. Apply Restaurax with a foam applicator, wiping evenly across the plastic. Allow the product to penetrate and restore the surface; repeat as needed for heavily weathered areas. To reduce gloss, buff lightly with a microfibre cloth after application.
Vonixx V-Paint Pro is an advanced SiO₂-based ceramic coating formulated to protect and enhance automotive paintwork with long-lasting durability of up to 3 years. Developed with reactive silicon molecules, it forms a high-resistance nanotechnological barrier that delivers exceptional hydrophobic performance, UV defence and deep gloss.
When applied correctly, the nanofilm created by V-Paint Pro helps guard against environmental aggressors such as tree sap, bird droppings, acid rain, sea air and harmful UV rays, while also minimising the marks caused by sub-optimal washes, helping to prevent premature paint degradation.
Ideal for paintwork and wheels, this ceramic coating not only enhances visual depth and shine but also makes maintenance washing easier thanks to its water-repellent surface.
Curing Time
Partial cure: 12 hours
Full cure: 6 days
Important: During the first 6 days, silica-based coatings may temporarily show water spots caused by calcium and magnesium salts when exposed to rain or mud.
To minimise this effect and prevent marking, it is strongly recommended to apply SiO₂-Pro 4 days after applying V-Paint Pro. This enhances gloss, restores a silky touch and significantly extends the lifespan of the ceramic layer.
Up to 2 years of durable protection for paintwork.
Hydrophobic water repellency for easier cleaning.
Deep, high-gloss finish that enhances paint depth.
Protects against UV rays, acid rain, tree sap and environmental damage.
Suitable for use on paint and wheels.
Follow all instructions on the label and packaging carefully to ensure maximum durability
Keep the bottle tightly closed to prevent product solidification
Ensure the paintwork is in perfect condition and free of scratches before coating.
Apply using the included suede-wrapped applicator pad in cross-hatch movements, covering an area up to 80 × 80 cm at a time.
Buff off excess with a clean, dry microfibre towel until the desired shine is achieved.
Repeat the procedure section by section until the entire vehicle is complete.
Maintenance & Care Tips
Always wash the vehicle in the shade, using V-Floc shampoo and a microfibre wash mitt
Apply SiO₂-Pro every 30–45 days to maintain gloss, enhance smoothness and prolong coating durability
Do not use acidic, alkaline or solvent-based products
Perform the first wash only after 6 days
If exposed to rain before full cure, dry the vehicle immediately with a drying towel
Do not use cleaner waxes on the ceramic layer, as abrasives may remove the coating
11 in stock
Vonixx Hydrox Wash is a revolutionary 2-in-1 automotive shampoo that combines powerful cleaning performance with SiO₂-based ceramic protection in a single step. Its advanced formula works to remove dirt and contaminants while simultaneously depositing a protective hydrophobic layer on the paintwork, resulting in a smooth, glossy finish that helps repel water and grime.
This innovative wash delivers intense shine and satin-smooth feel, making it ideal for regular maintenance between deeper detailing sessions. Hydrox Wash is safe for use on paintwork, plastics and glass, and its ceramic technology provides protection that can last up to four months under normal conditions, boosting water repellency and helping keep your vehicle cleaner for longer.
Bucket Wash: Dilution up to 1:20
Pump Sprayer: Dilution 1:20 to 1:20
Snow Foam: Dilution 1:10
SiO₂-infused car shampoo that cleans and protects in one step
Deposits a protective ceramic layer during the wash process
Enhances gloss, slickness and water repellency
Provides protection lasting up to 4 months
Highly effective cleaning power without stripping existing coatings
Suitable for foam cannon and bucket wash methods
Ideal for maintenance of ceramic-protected vehicles
Wet the vehicle and prepare the shampoo dilution (foam cannon or bucket), as preferred.
Apply Hydrox Wash liberally with a wash mitt or foam and work section by section.
Gently agitate to break down dirt and contaminants.
Rinse thoroughly, ensuring no residue remains.
Dry the surface with a clean microfibre towel for a brilliant, protected finish.
96 in stock



Reviews
There are no reviews yet.