- Make sure the painting is in perfect condition and free of scratches.
- Apply the product using the applicator included in the packaging, wrapped in suede microfiber.
- Begin application with crisscrossing movements, in an area no larger than 80cm x 80cm, until the area is completely covered.
- Finish by using clean, dry microfiber towel until the desired shine is achieved.
- Finish with an ultra-fine finishing cloth. Repeat the procedure until the entire vehicle is complete. In case of stains, we recommend reapplying the product to the stained area and removing it within 1 minute.
- Keep the packaging always closed to prevent the product from solidifying. If the nozzle becomes clogged, it is recommended to reopen the orifice with a paperclip or needle.
- Washing and maintaining suede:
- Spray a generous amount of Revelax onto the applicator and microfiber cloth to dissolve the product.
- Place a few drops of Microlav onto the applicator and microfiber cloth.
- Rub well.
- Rinse afterwards.
- Dry in the shade.
Technical Specifications
APPLICATION
Ready to use.
RECOMMENDED USE
Paint and wheels.
DURABILITY
Up to three years of paint protection.
HEALING TIME
Partial: 12 hours. Total: 6 days.
NOTES
During the first 6 days, silica-based coatings have a slight tendency to form watermarks composed of calcium and magnesium salts when exposed to rain or mud. To minimize this effect and prevent these droplets from marking the paint, it is recommended to apply SiO2-PRO four days after applying V-Paint. The product minimizes the effects of watermarks, leaves a velvety touch and high gloss, prolonging the life of the vitrified layer.
ADDITIONAL INFORMATION
All instructions on the product label and box must be followed rigorously to ensure excellent quality and long shelf life. Always keep the packaging closed to prevent the product from solidifying.
PERFORMANCE
Three to four cars.
ATTENTION
We do not recommend applying V-Paint Pro to leather, headlights, taillights, or glass.
It can also be used on alloy wheels.
