20 results
-
PRIZM £ 13,99 – £ 26,99Price range: £ 13,99 through £ 26,99
Prizm Vonixx is a specialist glass decontamination cleaner developed to remove stubborn water marks, mineral deposits and embedded contaminants that ordinary glass cleaners cannot eliminate. Its advanced formula restores clarity, transparency and visibility, making it ideal for automotive glass care where precision and performance are required.
Although designed primarily for glass surfaces, Prizm is also versatile enough to be used on emblems, paint decontamination, engine components and chassis, provided a spot test is carried out beforehand. Its controlled action delivers effective cleaning without compromising the surface when used correctly.
Additional Information
Always carry out a spot test before use on any surface.
Do not allow the product to dry on the applied surface.
Rinse thoroughly immediately after application.Important Safety Information
Do not use on automotive mirrors.
Do not apply to the interior side of automotive glass.
Always wear nitrile or latex gloves and safety goggles throughout the entire application process.
Pizm by Vonixx is an acid-based glass treatment designed to restore maximum clarity to automotive glass.
When applied to the windscreen, it naturally enhances transparency, revealing the true condition of the surface. As a result, pre-existing wiper marks and light scratches may become more visible after application.
Do not use this product on glass with deep scratches, cracks, or stone-chip damage. In such cases, the product may cause staining or surface blemishes.Dilution +Ready to Use
Key Features +Removes water spots and mineral deposits
Restores clarity and transparency to glass
Versatile application across multiple automotive surfaces
Professional-grade performance when used as directedHow to use +Always perform a test on a small, inconspicuous area to evaluate the result.
Apply a small amount of product to a microfibre towel.
Rub the glass using firm, back-and-forth horizontal movements, applying moderate pressure, over an area no larger than 60 × 60 cm, for at least 40 seconds.
Do not allow the product to dry on the surface. If it begins to dry, lightly re-dampen the microfibre towel and reapply.
Rinse thoroughly with plenty of clean water immediately after use.30 in stock
-
Pro Ceramic Coating Kit
£ 84,97Original price was: £ 84,97.£ 80,79Current price is: £ 80,79.Take your vehicle’s finish to the next level with this complete correction-to-protection system. Designed for both enthusiasts and professional detailers, the kit combines precision paintwork refinement with high-performance ceramic protection — delivering a flawless finish that lasts.
Begin by refining your paintwork with advanced correction products that effectively remove swirls, medium defects and imperfections, restoring clarity and depth. Then lock in weeks of durable defence with an advanced ceramic coating that creates a strong hydrophobic barrier, enhances gloss and shields your paint from environmental wear, water spots and contamination.
This all-in-one system not only improves surface appearance dramatically but also maintains protection and shine with ease — making it an essential solution for anyone serious about premium paint care.
What's included +REZET - (PANEL WIPE) - 500ml 500 mlProfessional hologram remover and inspection spray designed to eliminate polishing oils and reveal the true condition of the paint before protection.V20 - 500ml 500 mlMedium-cut refining compound engineered for efficient paint correction on soft clear coats, removing swirls and imperfections while enhancing gloss and clarity.V-PAINT PRO - 50ml 50 mlAdvanced ceramic coating for paintwork and wheels offering up to 2 years of protection with intense gloss, hydrophobic performance and enhanced chemical resistance.How to use +Why This Kit Works
Surface Inspection:
Rezet removes polishing residues and reveals real paint defects, ensuring precise correction and optimal coating bonding.Paint Refinement:
V20 delivers controlled correction on soft clear coats, removing medium defects while restoring depth and shine.Long-Term Protection:
V-Paint Pro seals the corrected surface with a durable ceramic layer, enhancing gloss, slickness and hydrophobic performance for up to 2 years.This is a complete correction-to-coating system designed for serious detailing results.
Key Features +Benefits at a Glance
Professional 3-step correction and protection system
Removes swirls and polishing residues with precision
Enhances gloss, clarity and paint depth
Ceramic protection with up to 2 years durability
High hydrophobic surface performance
Ideal for enthusiasts and professional detailers
Vonixx professional-grade technology -
Pro Heavy-Duty Wash Kit
£ 96,97Original price was: £ 96,97.£ 91,99Current price is: £ 91,99.Engineered for detailers and serious car enthusiasts, this all-in-one kit delivers powerful surface decontamination and interior renewal — transforming both exterior and cabin with professional-grade results.
Start by removing stubborn contaminants like tar, adhesive residues and iron fallout with advanced cleaners that dissolve impurities conventional washes struggle to shift. Then, deep-clean fabrics and upholstery to lift ingrained dirt and restore freshness throughout the cabin. Finally, revitalise internal plastics and rubber trims to bring back colour, texture and that refined, refreshed appearance drivers love.
Whether preparing a vehicle for paint correction or simply elevating interior condition, this kit combines targeted cleaning strength with trim restoration performance to deliver a complete, high-impact detailing solution.
What's included +Professional upholstery and carpet cleaner developed for deep extraction cleaning and removal of heavy interior contamination.High-performance contamination remover formulated to eliminate tar, adhesive residues, sap and stubborn surface deposits.Interior plastic and rubber restorer that revitalises trims, enhances colour depth and improves surface appearance without greasy residue.How to use +Why This Kit Works
Heavy Exterior Decontamination:
Removex breaks down tar, glue residues and embedded contaminants prior to polishing or protection.Deep Interior Cleaning:
Vertex penetrates fabrics and upholstery for professional-grade extraction cleaning.Interior Trim Restoration:
Intense restores faded plastics and rubber trims, completing the detailing process with a refined finish.This system ensures surfaces are deeply cleaned, properly prepared and visually restored — meeting professional detailing standards.
Key Features +Benefits at a Glance
Professional-grade contamination removal
Deep extraction cleaning performance
Interior plastic and trim revitalisation
Optimised surface preparation before correction or protection
Ideal for detailing studios and advanced enthusiasts -
PULVIFLEX £ 9,99 – £ 29,99Price range: £ 9,99 through £ 29,99
Vonixx Pulviflex is a high-performance chassis protector developed to safeguard metal surfaces against corrosion, moisture and environmental wear. Its advanced formula forms a uniform, long-lasting protective film, ideal for protecting the vehicle underbody and exposed metal components.
Designed for durability and ease of application, Pulviflex creates a transparent protective layer that helps extend the lifespan of chassis components while maintaining a clean, well-protected appearance. It is suitable for use on cars, trucks, buses, trailers and agricultural machinery.
Dilution +Ready to Use
Key Features +Effective anti-corrosion protection
Forms a transparent protective fil
Smooth, even application
Ideal for chassis and underbody componentsHow to use +Spray a thin, even layer of the product over the entire surface to be treated.
Allow it to act for 60 minutes, or until a transparent protective film is formed.Note: During application, a thick, milky white layer may initially appear. This is normal. Once the product has fully cured, the protective layer will become clear and colourless.
-
QUANT – DILUTION SPRAY BOTTLE – 500ML £ 6,99
Quant is a specially designed dilution sprayer that makes mixing and applying automotive care products fast, accurate and mess-free. Built with clear graduated markings, it allows you to prepare precise dilutions — using X parts of product to reach the correct strength with water — so you can get professional-grade results every time.
Made from durable PEAD material that is resistant to both acidic and alkaline products, Quant PEAD is suitable for use with a wide range of concentrated car care solutions, including shampoos, degreasers, APCs and liquid waxes, helping you optimise product usage and save money.
With its integrated spray head, you can apply dilute solutions directly and evenly — ideal for cleaning panels, wheels, glass, trims or other surfaces without the need for separate mixing containers.
Key Features +Clearly graduated dilution scale for precise mixing every time.
Resistant to acidic and alkaline cleaning solutions.
Practical and safe way to mix and spray diluted car care products.
Compatible with a variety of concentrated automotive products (shampoos, APCs, degreasers, waxes).
Saves time and reduces waste by simplifying dilution and application.How to use +Add the desired amount of water and product to the Quant PEAD bottle according to the ratio required, shake to mix, and use the trigger sprayer to apply the solution evenly to the surface.
23 in stock
-
REMOVEX £ 16,99 – £ 139,99Price range: £ 16,99 through £ 139,99
Removex is a powerful contamination remover formulated to tackle tough residues that standard cleaners struggle to eliminate. Its specialized formula dissolves and lifts road tar, bitumen, adhesive residues, decals, sap, brake dust fallout and other stubborn contaminants from automotive surfaces quickly and efficiently.
Designed for use on paintwork, wheels, chrome, metal trims and hard exterior surfaces, Removex restores surfaces to a clean, smooth condition before washing, polishing or sealing. It is a go-to solution for professional detailers and enthusiasts seeking deep cleaning performance without aggressive mechanical effort.
Dilution +Heavy degreasing (engine, chassis, heavy grime): 1:10
Medium cleaning (general exterior, wheel arches): 1:20
Light cleaning / maintenance: 1:40
Key Features +High-efficiency adhesive remover for stickers, glue residue and tape marks
Powerful degreasing action against oils, grease and ingrained contamination
Safe on automotive clear coat, when used as directed
Does not stain or damage paintwork
Ideal for professional detailing and body shop use
Fast-acting formula that simplifies difficult cleaning tasks
Safe for use on paint, wheels, metal trims and chrome
Preparer surfaces for washing, polishing or protection round
Ready to use — no dilution requiredHow to use +Ensure the surface is cool and dry before application.
Spray Removex directly onto the affected area or onto a microfibre towel.
Allow the product to work for a few moments to penetrate and soften contaminants.
Agitate with a soft brush or microfibre until the residue loosens.
Rinse thoroughly with clean water or wipe with a fresh microfibre towel.
Repeat the process if further residue remains.30 in stock
-
RESTAURAX £ 14,99 – £ 36,99Price range: £ 14,99 through £ 36,99
Bring faded, dull and weathered plastic trims back to life with Restaurax by Vonixx — a premium plastic restoration and protection solution engineered to renew and protect automotive plastics with ease. Whether on bumpers, door panels, trims or dashboards, Restaurax revives ageing surfaces, restores original colour and delivers a long-lasting glossy finish that looks like new.
Its advanced polymer-based formula not only revitalises appearance but also shields plastics against the effects of time and harsh environmental exposure, helping to prevent premature fading and degradation. This makes it ideal for both internal and external plastic surfaces, so you can refresh interior trims and exterior mouldings with the same high-performance result.
Restaurax offers water resistance and UV protection, with durability of up to six months on interior plastics and around two months on exterior plastics when applied as directed.
Dilution +Ready to Use
Key Features +Deeply renews faded plastic surfaces
Restores original colour and gloss
Protects against UV damage and environmental ageing
Suitable for interior and exterior plastics
Easy ready-to-use applicationHow to use +For best results, start with a clean, dry surface. Apply Restaurax with a foam applicator, wiping evenly across the plastic. Allow the product to penetrate and restore the surface; repeat as needed for heavily weathered areas. To reduce gloss, buff lightly with a microfibre cloth after application.
-
REVOX – 500ml £ 13,99
Revox is a synthetic tyre sealant formulated to protect, enhance shine and renew the appearance of tyres, while delivering total water repellency. Its exclusive solvent-free formula is eco-friendly and non-flammable, making it safe and efficient for regular use.
Highly resistant to rain and mud, Revox keeps tyres cleaner for longer, maintaining a fresh, well-finished look even in demanding conditions.
Dilution +Ready to Use
Key Features +Water-resistant – will not wash off
High durability – up to 45 Days
Maximum yield
Ready to UseHow to use +Clean the tyres thoroughly before application.
Using a foam applicator or dedicated tyre applicator, apply the product evenly, ensuring full coverage without streaks or missed areas.
Check the desired level of gloss. For a higher shine, apply a second coat after 5 minutes.70 in stock
-
REXER – 500ml £ 15,99
REXER is a high-durability pigmented tyre restorer that forms a dry, glossy and water-resistant film in a single application. Designed to renew and enhance the appearance of tyres, it delivers a long-lasting, uniform finish with excellent resistance to moisture.
Important Note
Pigmented product. Wear protective gloves to avoid staining hands.
If the product comes into contact with any surface other than the tyre, wash immediately.Dilution +Ready to Use
Key Features +Single-application performance
Dry and glossy finish
Water-resistant protective filmHow to use +Shake well before use.
Clean and dry the tyres thoroughly using Delet Vonixx.
Using a soft-bristle brush, apply the product evenly over the entire tyre, ensuring full coverage without streaks or runs.
Allow the product to dry for 30 minutes.70 in stock
-
REZET – (PANEL WIPE) – 500ml £ 12,99
REZET is a hologram revealer developed for use between polishing stages in automotive paint correction. Its primary function is to remove polishing compound residues, revealing the true condition of the paintwork after polishing.
In addition to paintwork, REZET can also be safely used on plastic components and glass surfaces, providing effective surface decontamination and cleaning without causing damage.
Dilution +Ready to Use
Key Features +Reveals imperfections and holograms
High decontamination powerHow to use +Ensure the surface is cool to the touch to avoid potential staining.
Spray a small amount of product onto a microfibre towel.
Spread over the surface until the product fully evaporates.
Repeat the process if necessary.59 in stock
-
SHINY – 500ml £ 15,99
Vonixx Shiny is an advanced tyre dressing developed exclusively to renew, protect and deliver an intense, long-lasting shine to automotive tyres. Its specialised formula conditions the rubber while creating a wet-look gloss finish that elevates the overall appearance of your vehicle and highlights attention to detail.
Unlike many tyre shine products, Shiny is water-resistant and durable, maintaining its striking gloss even in wet conditions and for extended periods — with results that can last up to 60 days on properly prepared tyres.
Key Features +Intense high-gloss finish for a wet, showroom-quality look
Long-lasting protection, resisting rain and mud
Water-resistant formula that doesn’t wash away easily
Conditions and protects tyre rubber against drying and ageingHow to use +Clean the tyre surface thoroughly and allow it to dry.
Apply the product using a foam applicator, spreading evenly until the tyre is fully revitalised.
If necessary, apply an additional layer to enhance gloss and finish.71 in stock
-
SINERGY PAINT – 500ml £ 25,99
Vonixx Sinergy Paint is an easy-to-apply spray-on protective coating developed to guard automotive paintwork with up to 12 months of durable protection. Its advanced Carbosiloxy nanotechnology combines the chemical action of carbon with silicon to form a strong, super-hydrophobic film that repels water, reduces friction and enhances overall surface performance.
This innovative coating not only protects paint from environmental damage and water spotting but also delivers exceptional shine and clarity, minimising the appearance of light scratches and swirls. Its fast curing time (around 60 minutes) and spray-on convenience make it ideal for both enthusiasts and everyday users seeking long-lasting paint protection with minimal effort.
Dilution +Ready to Use
Key Features +Up to 12 months protection for automotive paintwork
Advanced Carbosiloxy technology for a resilient, hydrophobic barrier
Enhanced gloss and visual depth
Reduces friction and helps minimise light scratches
Easy spray-on application, like a spray waxHow to use +Ensure the paintwork is clean and completely dry.
Spray a small amount of product onto a clean, dry microfibre towel.
Spread the product using side-to-side motions, working on areas no larger than 60 × 60 cm.
After 10 seconds, buff the surface using a second clean, dry microfibre towel to finish.
Repeat the process until the entire vehicle is completed.47 in stock
-
SINERGY PLASTIC – 500ml £ 21,99
Vonixx Sinergy Plastic is a water-based spray coating developed to protect and enhance both interior and exterior plastic surfaces with long-lasting results. Using the brand’s advanced Carbosiloxy nanotechnology, where carbon works in synergy with silicon (SiO₂), it forms a highly resistant, super-hydrophobic film that repels water and dirt while protecting against UV damage.
Unlike traditional plastic protectants, Sinergy Plastic isn’t just a temporary cosmetic treatment — it creates an engineered protective barrier that helps plastics stay cleaner for longer without making them overly glossy, preserving a natural matte to satin finish.
Recommended For
Exterior trims, mouldings and bumpers
Interior dashboards, door panels and plastic mouldings
Vehicles where long-term plastic protection is desired
Maintenance of plastics already coated with ceramic protectionDilution +Ready to Use
Key Features +Up to 5 months of protection on exterior plastics
Up to 3 years of protection on interior plastics
Easy spray-on application, like a spray wax
Hydrophobic performance with excellent water beading
Reduces water spots and dirt buildup
UV protection helps prevent fading
Enhances appearance with a matte to satin finishHow to use +Ensure the plastic trim is clean and completely dry.
Spray a small amount of product onto a clean, dry microfibre towel.
Spread the product using side-to-side motions, working on areas no larger than 60 × 60 cm.
After 10 seconds, buff the surface using a second clean, dry microfibre towel to finish.
Repeat the process until the entire vehicle is completed.48 in stock
-
SINERGY WHEEL – 500ml £ 25,99
Vonixx Sinergy Wheel is an advanced spray-on wheel coating developed to protect, enhance shine and simplify cleaning for automotive wheels. Powered by Vonixx’s exclusive Carbosiloxy nanotechnology, carbon and silicon work in synergy to create a highly resistant, super-hydrophobic protective film that repels water, dirt and brake dust, helping wheels stay cleaner for longer.
This advanced coating delivers up to 6 months of durable protection, even under challenging conditions, and is engineered to withstand the high temperatures transmitted from braking thanks to its superior carbon chain structure.
Sinergy Wheel isn’t just protective — it also enhances appearance with a deep gloss finish, reduces friction, and can help minimise light scratches and swirls while making wheel maintenance easier between washes.
Dilution +Ready to Use
Key Features +Up to 6 months of wheel protection
Hydrophobic, water-repellent film
Enhanced gloss and wheel appearance
Easier cleaning and maintenance
Resistant to high temperatures from braking
Helps reduce light scratches and swirlsHow to use +Ensure the wheel surface is clean and dry.
Spray a small amount of product directly onto the wheel.
Wipe off with a clean, soft microfibre towel until the desired finish is achieved.12 in stock
-
SINTRA FAST – 500ml £ 9,99
Vonixx Sintra Fast is a universal, high-performance interior cleaner formulated with a pH-balanced, bactericidal and germicidal action to deeply cleanse and sanitise automotive interiors. It effectively removes grease, dirt, stains and unpleasant odours, leaving surfaces fresh, clean and hygienic.
Designed for versatility, Sintra Fast can be used on a wide range of interior surfaces including dashboards, door panels, leather, carpets, upholstery and fabric, making it an essential product for thorough interior detailing.
Whether you’re maintaining everyday cleanliness or preparing a vehicle for sale or show, Sintra Fast delivers powerful multi-surface cleaning with sanitising properties. Its balanced formula makes interior care effortless while improving overall hygiene and comfort.
Key Features +Deeply cleans and removes stubborn dirt, grease and stains
Bactericidal and germicidal action helps eliminate disease-causing microorganisms
Reduces bad odours, leaving the cabin fresh
Safe and effective on a variety of interior surfaces
Balanced pH for efficient cleaning without harsh residues
Ready to UseHow to use +Spray the product directly onto the surface to be cleaned and sanitised.
Using a soft brush, detailing brush or foam applicator, agitate with circular motions until the dirt is fully loosened.
Remove excess product and residue with a slightly damp microfibre towel.
Dry the surface using a clean, dry microfibre towel.89 in stock
-
SINTRA PRO £ 15,99 – £ 32,99Price range: £ 15,99 through £ 32,99
Vonixx Sintra Pro is a multi-purpose, ultra-concentrated interior cleaner designed to tackle heavy soils, grease, stains and embedded dirt across a wide range of surfaces inside your vehicle. With its pH-balanced, bactericidal and germicidal formula, it not only cleans deeply but also helps eliminate disease-causing microorganisms, making your car’s cabin healthier and fresher.
Suitable for use on dashboards, door panels, leather seats, carpets and upholstery, Sintra Pro removes challenging grime without damaging surfaces. Its low-foaming formula also performs exceptionally well with extraction machines and detailing tools, delivering thorough cleaning with minimal effort.
Dilution +Heavy stains (heavily soiled fabric and carpets) – 1:5
General interior cleaning – 1:10
Light maintenance and delicate surfaces – 1:20
Key Features +Ultra-concentrated for powerful cleaning performance
Removes grease, stains, oils and general dirt
Bactericidal and germicidal action for a healthier interior
Reduces unpleasant odours
Safe for dashboards, plastics, leather, carpets and upholsteryHow to use +Dashboards, door panels, trims and leather seats
Dilute the product according to the recommended ratio
Interior maintenance: 1:50
Extractors machines: up to 1:60
Tornador guns: 1:10Spray the solution onto the area to be cleaned.
Agitate using a soft brush, detailing brush or foam applicator, working in circular motions until dirt is fully loosened.
Remove residue with a slightly damp microfibre towel.Carpets, upholstery and fabrics
Dilute the product according to the recommended ratio.
Heavy dirt: 1:10
Medium dirt: 1:20
Light dirt: 1:30Spray the solution evenly onto the surface.
Agitate with a soft brush or foam applicator using circular motions
Use a wet vacuum/extractor to remove all loosened dirt.
Allow the surface to dry completely. -
SIO2-PRO – 500ml £ 16,99
Vonixx SiO₂-PRO Ceramic Spray Sealant is a versatile, SiO₂-based spray coating designed to enhance, protect and maintain your vehicle’s surfaces with exceptional ease. Whether used as a standalone protective layer or as regular maintenance over existing ceramic coatings, SiO₂-PRO delivers a durable hydrophobic barrier, improved gloss and water-shedding performance across paint, plastics, glass, wheels and metal surfaces.
Powered by a balanced formula of long-chain silanes and siloxanes, this ceramic technology promotes incredible water beading, dirt repellency and UV protection, helping to reduce friction and minimise the risk of light surface marks while significantly enhancing surface finish.
SiO₂-PRO also offers flexibility in application — it can be applied to a dry or even a wet car as a drying aid, making it ideal for routine detailing or when you want to refresh protection quickly after washing.
Dilution +Ready to Use
Key Features +Provides a hydrophobic, water- and dirt-repellent layer
Enhances surface gloss and clarity
UV protection helps guard against fading
Up to 4 months of protection on paintwork
Can be used as stand-alone protection or on top of ceramic coatings
Suitable for paint, plastics, glass, wheels and metal
Leaves a velvety touch and reduced friction finish
How to use +Ensure the surface is clean and completely dry.
Shake the product well before use.
Spray a light mist onto the surface, working in sections no larger than 60 × 60 cm, and buff immediately using a clean dry microfibre towel, turning it frequently until the desired finish is achieved.
Repeat the process until the entire vehicle is completed. If any streaking or marks occur, repeat step 3.
70 in stock
-
STRIKE – 500ml £ 15,99
Vonixx Strike is a powerful tar and adhesive remover with a balanced formula designed to tackle stubborn road tar, adhesive residue and self-adhesive label glue safely and effectively. Whether you’re dealing with tar splatter from roadworks or old sticker residue, Strike dissolves tough contaminants without harming the paintwork, making it an essential addition to your car care routine.
Formulated with a solvent-based orange extract blend, Strike works quickly to loosen embedded grime, helping you restore surfaces to a clean, smooth finish that’s ready for protection or further detailing. It’s suitable for use on automotive paint and many exterior surfaces where stubborn residues can build up.
Additional Information
Suitable for removing ingrained contamination
Not recommended for use on headlights or polycarbonate surfaces
Always perform a compatibility test on a small area before full application
The product has a strong, characteristic odour during application; however, this dissipates completely within up to 24 hours after useDilution +Ready to use for quick and easy application
Key Features +Removes tar, adhesive residues and sticker glue with ease
Does not damage paint or leave stains
Does not damage clear coat
Balanced formula for effective yet controlled cleaning
Ready to use for quick and easy applicationHow to use +Spray a small amount of product onto the area to be cleaned.
Allow it to dwell for 1 minute, then agitate using a detailing brush or microfibre towel until the contamination begins to release.
Rinse thoroughly with plenty of water, continuing to agitate to ensure complete residue removal.
Dry the surface with a clean, dry microfibre towel.
Repeat the process if necessary.
Note: Strike has affinity with most types of adhesive residues; however, a preliminary test is recommended to confirm compatibility with the specific contamination71 in stock
-
TRYON 3-IN-1 PLASTIC RESTORER – 500ml £ 13,99
Tryon 3-in-1 is a versatile and high-performance plastic and rubber restorer developed to renew, protect and enhance surfaces throughout your vehicle. Its water-based formula contains SiO₂ (silica) that delivers durable protection, enhanced hydrophobicity and a rich glossy finish without leaving oily residues.
This all-in-one product is suitable for both internal and external plastics, as well as rubber trim, seals and mouldings, making it an excellent solution for reviving faded components, reinforcing UV resistance and restoring a deep, refreshed appearance.
Dilution +Ready to Use
Key Features +3-in-1 formula that restores, protects and renews in one application
Water-based with SiO₂ for long-lasting durability without greasy residue
Restores faded and weathered plastic surfaces
Revives deep colour with a uniform, renewed appearance
Provides long-lasting protection against sun and environmental damage
Leaves surfaces with a high-gloss, renewed look
Suitable for internal and external plastics, trims, bumpers and rubber sealsHow to use +Ensure the surface is clean and completely dry.
Apply a small amount of product evenly using a foam applicator, spreading until full restoration is achieved, without streaks or marks.Note: On heavily dried or faded plastics, a second application may be required to achieve optimal restoration.
106 in stock
-
Ultimate Alloys Kit
£ 38,98Original price was: £ 38,98.£ 36,99Current price is: £ 36,99.Take control of stubborn wheel contamination and finish with long-lasting protection. This expertly paired duo tackles embedded iron fallout and then locks in defence against heat, brake dust and environmental wear.
Start by dissolving and removing brake dust, oxidised iron particles and ingrained contamination safely and effectively. Then apply advanced wheel protection designed to withstand high temperatures and repel water, grime and road film — keeping wheels cleaner for longer and maintaining that freshly detailed look.
Perfect for car enthusiasts and professionals alike, this kit delivers deep decontamination plus durable performance where it matters most.
Description +Built for wheel and metal surface care, combining deep iron removal with long-lasting ceramic wheel protection.
What's included +IZER 500 mlAdvanced iron fallout remover designed to eliminate embedded metallic contamination safely.SINERGY WHEEL - 500ml 500 mlHigh-durability ceramic coating for wheels, offering heat resistance and hydrophobic protection.How to use +Why This Kit Works
Iron Removal: Izer dissolves embedded brake dust and iron particles.
Wheel Protection: Sinergy Wheel adds durable, heat-resistant ceramic protection.
Key Features +Brake dust removal system
Ceramic wheel coating
Heat-resistant protection
Professional wheel detailing performance








