- Perform a test on a small area to verify the result.
- Apply a small amount of the product to a microfiber towel.
- Rub the product onto the glass using side-to-side back-and-forth movements, applying moderate pressure, in an area no larger than 60 x 60 cm for at least 40 seconds, without allowing the product to dry.
- If it dries, dampen the microfiber towel again and reapply. Then rinse thoroughly with plenty of water.
Technical Specifications
IMPORTANT!
Product developed for professional use only.
ATTENTION!
Never use the product without first testing it on a small area of the glass. Depending on the quality and composition of the glass, it may cause further staining. The use of safety glasses and nitrile latex gloves is mandatory and indispensable when using the product. Do not allow the product to drip onto the paintwork, as this may cause irreversible stains. If the product comes into contact with ceramic or porcelain tile flooring, it may cause irreversible stains. On windshields, the product will naturally restore 100% transparency; therefore, pre-existing wiper scratches will be more visible. Scratches in general may also become more visible after application.
RECOMMENDATION
This product cannot be used on automotive mirrors.
PRECAUTIONS FOR USE
When handling Prizm, we suggest the following guidelines: Use nitrile latex gloves throughout the product application process. Do not allow the product to drip onto the paintwork, as this may cause irreversible stains. It is highly recommended to test the product on a small area of the glass to check the application result before starting to use the product. Avoid letting the product dry on the applied surface. If this happens, dampen the microfiber towel again and reapply. Keep the product in its original packaging and do not reuse it. Keep Prizm out of reach of children and pets.
USABILITY
Ready to use
