- Shake the product well before use.
- Before starting the procedure, carefully inspect the glass. If there is any damage, such as cracks, chips, or deep stone chips, do not proceed with the polishing.
- It is of fundamental importance that the glass is clean and decontaminated with Prizm Vonixx.
- Apply the product directly to the felt beret, carpet, or jeans.
- Perform cross-over and overlapping movements with a rotary polisher, maintaining a speed between 1200 and 1600 RPM.
- Check the glass temperature, keeping it between 55º and 65º.
- Lubricate the polishing pad with a water sprayer as needed, avoiding direct contact with the glass.
OBSERVATION: Avoid touching the glass during the polishing process. Never spray water directly onto the glass during polishing, as this can cause total or partial cracks in the glass. The angle of the polishing pad can favor the formation of bevels and marks on the glass. Depending on the depth of the scratches, sanding steps may be necessary.
Technical Specifications
DILUTION
READY TO USE
RECOMMENDED USE
Glass Polishing Compound
PRECAUTIONS
WARNING! Dangerous if swallowed. Avoid prolonged contact with skin. Wash hands after use. KEEP OUT OF REACH OF CHILDREN AND PETS. READ THE LABEL CAREFULLY BEFORE USING THE PRODUCT.
