- Shake the product well before use.
- Apply 4 to 5 drops to the polishing pad and spread the product.
- Begin polishing with a rotary polisher, at a speed between 800 and 1800 RPM, or at a speed of 3000 to 4800 OPM in the case of a random orbital polisher, in an area no larger than 60cm x 60cm.
- Remove the product using a soft microfiber towel.
- If necessary, repeat the process until you achieve the desired result and shine.
Technical Specifications
NOTES
If you wish to perform a water repellency test, we recommend doing so after 1 hour. Depending on the condition of the paint and type of varnish, choose the buffing pad that best suits the process, testing it on a small area beforehand. Excellent results are usually obtained using a medium-cut buffing pad, but the professional may use more aggressive pads if necessary. In case of a cut with a very aggressive pad, another pass with a medium-cut pad may be necessary to achieve an excellent finish. For maintenance of protection and shine, we recommend using Blend Ceramic & Carnauba Paste Wax or Blend Ceramic & Carnauba Spray Wax.
PRECAUTIONS
WARNING! Dangerous if swallowed. May cause respiratory damage through prolonged or repeated exposure. KEEP OUT OF REACH OF CHILDREN AND PETS. Avoid prolonged skin contact. Wash hands after use. In case of contact with eyes, rinse thoroughly with plenty of water for 15 minutes. If inhaled excessively, remove the person to fresh air. If swallowed, do not induce vomiting and immediately contact a Poison Control Center or the nearest Health Service, taking the product packaging or label with you. CEATOX: 0800 014 8110. Keep the product in its original packaging. Protect the product from sunlight and heat. Do not reuse the empty packaging for any other purpose.
INDICATION
One-step polisher
SURFACE
